Facebook

Celebrating our Brand of the Month with 15% Off Augustinus Bader

SHOP AND EARN LOYALTY POINTS
Earn Skinstation points on over 500 products. Sign up!
MZ Skin

MZ SKIN LightMAX Minipro LED

£225.00 RRP £300.00
Free UK Shipping
Earn loyalty points

Price includes UK sales tax. Tax will be deducted at checkout if you are outisde of the UK.

description

Helps Treat: The collagen production to reduce under-eye lines.

Feels Like: An LED under eye mask.

Recommended For: Those looking to reduce dark circles, puffiness and fine lines and wrinkles, under, and around the eyes.

This first-to-market device combines active cosmetics with the power of LED for a supercharged eye-care routine that delivers targeted light-therapy to help reduce dark circles, puffiness and fine lines and wrinkles, under, and around the eyes.

Clinically proven to: Improve fine lines by up to 30% in four weeks Reduce wrinkle depth by 36% in four weeks Red 630nm and Near Infrared 830nm wavelengths help to stimulate collagen, reduce inflammation and visible signs of fatigue.

This reusable device is ultra-thin (1.77mm) for ultimate portability and comfort. The device adheres onto the skin with medical-grade hydrocolloid patches, infused with powerful active ingredients formulated to work in conjunction with the LED for combined efficacy, targeting fine lines and wrinkles, discolouration, and skin elasticity.

The LightMAX MiniPro EYECONIC™ LED system consists of the following key components:

  • 2 x Silicone LED Patches
  • 2 x Magnetic 2 pin, 4mm to USB A Charging Cables
  • 29 x Individually Wrapped Hydrocolloid Patches including 1 Sensitisation Patch
  • 1 x User Manual
  • 1 x Travel Pouch Technical Specifications:
  • 630nm. NIR 830nm 6 diodes Power: 30mW/cm2 Energy: 18J/cm2 per 10min treatment
How to Use
  • For optimal results use 10 mins daily, 3-5 times per week.
  • Remove the contents of the LightMAX MiniPro EYECONICTM LED box.
  • Peel the device side of the Hydrocolloid Patch.
  • Attach it to the LightMAX MiniPro EYECONICTM LED device.
  • Once secured to the device, peel the face side of the Hydrocolloid Patch.
  • Press firmly onto your under-eye area until secure.
  • Hold down the power button on each device until LED lights appear.
  • After 10 minutes the LED device will automatically turn off signalling the end of your treatment.
  • Remove gently from the skin.
  • Remove the Hydrocolloid Patches from the LED and discard them.

Using your ring finger, apply a small amount of Soothe & Smooth to the under eyes Using LightMAX MiniPro EYECONICTM LED: Regarding electromagnetic compatibility (EMC) and electromagnetic fields (EMF), in and around the home environment the LightMAX MiniPro EYECONICTM LED should be kept away from radio frequency (RF) equipment to avoid interference. Treatment Recommendations: For the treatment of facial wrinkles, the best results are seen by treating for 3-5 times a week for 6 weeks. Maintenance treatment should be carried out as required, according to lifestyle and skin condition. Carrying out a treatment: DO NOT over flex the LightMAX MiniPro EYECONICTM LED device. Although it is flexible, it is not designed to withstand excess bending or folding. DO NOT use the LightMAX MiniPro EYECONICTM LED without a Hydrocolloid Patch. Ensure LightMAX MiniPro EYECONICTM LED is fully charged before commencing a treatment session. Cleanse or exfoliate the skin to remove any traces of skincare. Use a new Hydrocolloid Patch every treatment session. See the “How to use the Hydrocolloids” section for a step-to-step guide to using the Hydrocolloids. Peel the device side of the backing paper off an adhesive Hydrocolloid Patch. Place the sticky side of the adhesive Hydrocolloid Patch onto LED side (white) of the LightMAX MiniPro EYECONICTM LED. Ensure the adhesive Hydrocolloid Patch aligns with the shape of the LightMAX MiniPro EYECONICTM LED. Press down across the entire surface of the adhesive Hydrocolloid Patch. Peel the face side of the backing paper from the adhesive strip. Using a mirror position the LightMAX MiniPro EYECONICTM LED over the treatment area. Switch ON the LightMAX MiniPro EYECONICTM LED. The device will automatically switch OFF after 10 minutes. You may stop the treatment at any time by pressing the ON/OFF button. After the treatment, carefully remove the LightMAX MiniPro EYECONICTM LED and adhesive Hydrocolloid Patch from the treatment area. Remove the adhesive Hydrocolloid Patch from LightMAX MiniPro EYECONICTM LED and discard in general household waste. If you would like to keep the Hydrocolloid Patch on the treatment area after the LED treatment cycle has finished, press the Hydrocolloid Patch onto the face using the tab and carefully peel the LED device from the Hydrocolloid Patch. Clean LightMAX MiniPro EYECONICTM LED by following the instructions in “Cleaning the LightMAX MiniPro EYECONICTM LED device”. Ensure that the device is NOT being charged when cleaning. You may treat more than one treatment area in a treatment session. DO NOT repeat a treatment on the same treatment area in the same session. Care and Maintenance: The lifetime of the lithium battery can be maximised by allowing it to fully charge and then fully discharge during regular use. Store LightMAX MiniPro EYECONICTM LED at room temperature in dry conditions. Avoid storing LightMAX MiniPro EYECONICTM LED in dusty conditions, in direct sunlight or in damp and humid conditions. LightMAX MiniPro EYECONICTM LED contains no serviceable parts. Before each use, with the device switched off, clean the LightMAX MiniPro EYECONICTM LED following the cleaning instructions below. DO NOT use the LightMAX MiniPro EYECONICTM LED device any longer if it shows any signs of damage to the material through wear and tear. DO NOT use the Hydrocolloid after its expiry date.DO NOT use the LightMAX MiniPro EYECONICTM LED if it has been exposed to environmental conditions outside of those specified in the Technical Specification. Cleaning the LightMAX MiniPro EYECONICTM LED Device: Before cleaning ensure that the charging cable is disconnected from the LightMAX MiniPro EYECONICTM LED and that the device is not charging. Clean the LightMAX MiniPro EYECONICTM LED with a water-based wipe. Stubborn stains or adhesive residue can be removed by wiping gently with 70% alcohol. DO NOT use water to clean LightMAX MiniPro EYECONICTM LED. DO NOT use the device if you think it has come into contact with water.

Key benefits
  • Helps stimulate collagen production to reduce under-eye lines and wrinkles, and visible signs of fatigue.
  • Helps even skin tone and texture, leaving skin firmer and plumper.
  • Improves fine lines by up to 30% in four weeks Clinical study on 20 trialists, 3 treatments per week for 4 weeks.
  • Reduces wrinkle depth by 36% in four weeks Clinical study on 28 trialists, one treatment twice a week for four weeks.

SKINCARE GOALS

An eye-care routine that delivers targeted light-therapy to help reduce dark circles, puffiness and fine lines and wrinkles, under, and around the eyes.

HOW TO APPLY

For optimal results use 10 mins daily, 3-5 times per week.

HOW IT WORKS

Red 630nm and Near Infrared 830nm wavelengths help to stimulate collagen, reduce inflammation and visible signs of fatigue.

MZ SKIN LightMAX MiniPro Eyeconic LED FAQ's

  • SKINCARE
    • What do I do on my first usage of the MZ SKIN LightMax MiniPro Eyeconic LED? 
      • Before use, fully charge the device. LightMAX MiniPro EYECONICTM LED uses an integrated lithium-ion polymer battery. When the LED patch is connected to the power supply do not attempt to use the device as the LEDs will not illuminate. To charge the LightMAX MiniPro EYECONICTM LED connect the 2-pin connection cable to the port on the upper side of the LED patch. Insert the USB A connector into a suitable USB power supply or laptop port. The indicator LED on the upper surface of the patch will illuminate orange to show that the LED patch is charging.The patch is fully charged when the indicator LED is green. When fully charged the battery will deliver 3-4 treatments before recharging. The lifetime of the lithium battery can be maximised by allowing it to fully charge and then fully discharge during regular use. Always ensure the LED patch is fully charged before commencing a treatment session. Unplug the 2-pin charging cable from the USB A charging port when not in use.
    • How can I see if my LED Mask is charged? 
      • LightMAX MiniPro EYECONICTM LED uses a single display LED on the rear of the LED patch and treatment LEDs to indicate the status of charging. Solid Green – Battery is fully charged. Solid Orange – Battery is Charging (Charging Mode) Low Battery Mode – When there is insufficient battery capacity to complete a full treatment, the Treatment LEDs will flash and the LightMAX MiniPro EYECONICTM LED will turn OFF –– You will need to recharge the patch.
    • How often should I use the LightMax MiniPro Eyeconic LED? 
      • For the treatment of facial wrinkles, the best results are seen by treating for 3-5 times a week for 6 weeks.
  • INGREDIENTS
  • HOW TO USE
  • BENEFITS

MZ SKIN LightMAX Minipro LED Reviews